Certifications 2

SDS No.: 41955 V001.11
Tangit Cleaner PVC-U/C ABS
Page 4 of 14
6.3. Methods and material for containment and cleaning up
Remove with liquid-absorbing material (sand, peat, sawdust).
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Ventilate working rooms thoroughly. Avoid naked flames, sparking and sources of ignition. Switch off electrical devices. Do
not smoke, do not weld. Do not empty waste into waste water drains.
During processing and drying after adhesion, ventilate well. Avoid all sources of fire such as stoves and ovens. Switch off all
electrical devices such as parabolic heaters, hot plates, storage heaters etc. in good time for them to have cooled down before
commencing work. Avoid all sparks, including those occurring at electrical switches and devices.
Hygiene measures:
Do not eat, drink or smoke while working.
Wash hands before work breaks and after finishing work.
7.2. Conditions for safe storage, including any incompatibilities
Ensure adequate ventilation.
Close the container carefully after use and store it at a good ventilated place.
Store protected from heat influence.
Temperatures between 0 °C and + 35 °C
Keep only in original container.
Do not store together with food or other consumables (coffee, tea, tobacco, etc.).
7.3. Specific end use(s)
Cleaner for pipe bondings