User's Manual

Connect Your Device:

Connect your loudspeakers to the Speaker

Output.

Make sure you connect the -/+ and the

L/R cables to the correct input.

Connect your subwoofer to SUB out.

Connect a CD player or other device via

its RCA cable to the RCA L/R input.

Make sure you connect the “L” plug to the

left input channel and the “R“ plug to the

right input channel.

Connect your phone/tablet/MP3 via an

AUX cable to AUX Input.

Use the optical input by connecting a

device using a optical ber cable to the

Optical Input.

Note:

Remember to change into the desired

source on the amplier.

(UK)

EQ Setting:

Increase treble: Long press (2-3sec) on Play/Pause increase

with 2dB each time. (max.8dB)

Decrease treble: Long press (2-3sec) on Skip backwards

decrease with 2dB each time. (max.8dB)

Increase bass: Long press (2-3sec) on Stop increase with

2dB each time. (max.8dB)

Decrease bass: Long press (2-3sec) on Skip forward decrease

with 2dB each time. (max.8dB)

Reset EQ: Long press (2-3sec) on Enter will reset

the EQ settings.

We recommend that EQ adjustments is done in BT mode and if

you have CD II or Tuner II they should be switched OFF during

EQ adjustments to prevent interruptions of these, during the

adjustment.