User manual

Rear panel

1. 12V/1.2A: Use this input to connect the radio’s DC power supply.

2. HEADPHONE: Inserting a headset plug will turn off the internal speaker. The output for

the headset is controlled by the volume knob.

3. RECORD OUT: The radio can be used as a tuner by connecting it to an amplifier.

4. AUX IN: Connect any stereo or mono audio source to this stereo input.

5. USB CHARGE: Designed for charging USB devices including iPods.

6. BATTERY COMPARTMENT: Loosen the big screw on the right side of the battery lit

using e.g. a coin. Install 6 pcs AA sized batteries in the compartment.

Note: remember to install the battery correctly in the compartment. The negative end

(-) of the battery must be placed with the end of the battery compartment with a spring.

The positive end (+) of the battery must be placed with the end of the battery

compartment without a spring.