User Manual

Graupner GmbH & Co. KG * Henriettenstraße 94-96 * D- 73230 Kirchheim/Teck * www.graupner.de
4
Kit Contents.
(See Detailed Parts List)
1 Pair ARC Wings - with elliptical tips, INTRO-Technik, torsion-rigid and fully
integrated Ailerons and Flaps incorporating Elastik Flap Technology. TA-
Servolocks and steel wing-joiner.
1 Fuselage – in brilliant white, with integrated Bowden cables and pre-installed
elevator bell-crank.
1 Canopy - Pre-formed Carbon.
1 Pair Tail-plane with integrated joiner system, finished leading and trailing edges.
1 Rudder in preformed Balsa
1 Set pre-formed wooden parts.
1 Quality hardware accessory pack.
1 Set wire parts.
1 Set Building Instructions.
Technical Data.
Wingspan (mm).......................................................................................................2501
Fuselage length (mm) .............................................................................................1070
Wing area (FAI) (dm
2
).................................................................................................32,1
Weight (gm). ............................................... ...................................................from 1450
Wing loading (FAI) (g/dm
2
) ...............................................................................from 43,2
Aerofoil ............................................................................................................... TA-029 Strak
Horizontal dihedral (deg) ....................................................................................... circa1,3
Centre of Gravity (mm - from root leading edge) ........................................................60-65
RC functions.
Ailerons 2 DS 3288 (Grp # 5187)
Flaps 2 DS 3288 (Grp # 5187)
Rudder 1 C 341 (Grp # 4093)
Elevator 1 C 341 (Grp # 4093)
Note: It is important that the Receiver Battery be selected to match the intended use.
The capacity ought to be sufficiently generous to cope with the on board radio control
system (it’s always more useful to have more battery capacity than lead nose-
weight!). Considering the use of up to 6 servos, we recommend a battery pack of at
least 1400 mAhr capacity (C ) and of good quality and always well maintained.
For a powered glider we recommend the following a tried and tested drive
configuration:
Motor: Compact 460Z 11,1 V (Grp. #7748)
Spinner: Precision Spinner (Grp. #6040.4)
Propeller: Folding Carbon Fibre (Grp. #1336.33.18)
Speed Controller: Brushless Speed Controller 60A (Grp. #7236)
Battery: LiPo Battery 3/2600 mAhr (Grp. #7652.3G2)