User Manual

Graupner GmbH & Co. KG * Henriettenstraße 94-96 * D- 73230 Kirchheim/Teck * www.graupner.de
18
Parts List.
Qty Description Purpose Material Dimension
1 Building Instructions DIN A4
1 Fuselage GRP white Ready made
1 Pair wing panels Foam/Obechi Ready made
1 Pair tail-plane panels Foam / Obechi Ready made
1 Rudder Balsa Ready made
1 Wire set Metal Various
1 Hardware accessory pack Various Various
1 Wing joiner Steel D10*240
Wire Set
1 Piano wire Elevator linkage Spring Steel D1.2*900
1 Piano wire Rudder linkage Spring Steel D1.2*900
Wooden Parts
1 Servo frame Fuselage Plywood Pre-cut
1 Compression strut Fuselage Forward Abachi 8 * 8 * 45
1 Compression strut Fuselage Rear Abachi 6 * 6 * 45
1 Battery tray Plywood Pre-cut
1 Motor mount Plywood Pre-cut
Canopy Parts
1 Canopy Canopy Carbon Ready made
1 Spring support strip Canopy catch Wood 30 * 20 * 3
1 Spring support strip Canopy catch Wood 30 * 10 * 1.2
1 Grooved support block Canopy catch Wood
1 Canopy pin Canopy catch Steel D3 * 50
1 Canopy spring Canopy catch Spring Steel D1.2 * 200
Accessories
6 Metal clevis Control linkages Steel M 2
6 Lock nut Control linkages Brass M 2
1 Bell-crank Elevator GRP Installed
2 Lock nuts Elevator bearing Aluminium Installed
1 Threaded bush Elevator bearing Brass Installed
2 Threaded Steel push-rods Aileron linkages Steel M2 * 200
2 Threaded Steel push-rods Flap linkages Steel M2 * 200
2 Aileron control horns Aileron linkage GRP Ready made
2 Flap control horns Flap linkage GRP Ready made
2 Wing lock socket Wing lock Nylon
2 Wing lock plug Wing lock Nylon
1 Eye bolt Rudder horn Alu M 4 (Ø 2)
4 Incidence pins Wings Steel Ø 3*40 (50)
1 Tow hook Winch hook Steel
1 Self-taping screw (temp) Winch hook Steel 3,5
Servolock Set
4 Servo frames Wings Plywood Ready made
2 Servo covers (scoop left) Wings Plastic Ready made
2 Servo covers (scoop right) Wings Plastic Ready made
16 Self tapping screws Wings Steel M2*10
1 Installation notes Wings Paper DIN A5
Note: Contents and technical details subject to change without notice.