User Manual

10
11
Using Optical Communication with a Data Logger
Do not connect a TR-50U2 to your computer until the software
has been installed.
Via optical communication between the TR-50U2 and a data
logger, it is possible to download recorded data to your computer
and make necessary recording settings in the data logger.
1.
Connect the provided USB communication cable's "A-plug" to a
USB port on your computer.
2.
Connect the “mini-B plug” to the TR-50U2.
To TR-50U2 To PC (USB Port)
USB mini-B plug USB-A plug
3.
Place the data logger on top of the TR-50U2 as shown in the gure,
making sure that the optical communication areas are aligned properly.
Place the logger face
down on the TR-50U2
Optical Communication Area
CAUTION
- Make sure that the cable is inserted fully, so as not to cause an improper connection.
- If the data logger is wet, make sure to dry it o before placing it on top of the TR-50U2.
4.
Recording settings for the data logger and the downloading of data
can now be carried out as desired.
After having installed the software...
Simply by placing a compatible data logger on a TR-50U2 that is connected
to your computer, the logger will be detected and the appropriate application
window will automatically open.
Specications
Device Name TR-50U2
Compatible
Devices
TR-5i Series: TR-51i / 52i / 55i-TC / 55i-Pt / 55i-V / 55i-mA / 55i-P
Discontinued: TR-51S/52S, TR-51A/52
Communication
Interfaces
Optical Communication
USB 2.0 (Mini-B connector)
Communication
Time
TR-5i/5S Series: About 20 sec.
TR-5 Series: About 160 sec.
Dimensions H 80 mm × W 56 mm × D 16.5 mm (excluding protrusions)
Weight Approx. 25 g
Operating
Environment
Temperature: -10 to 60 °C
Humidity: 90 %RH or less (no condensation)
Software(*1)
PC Software (Windows)
T&D Recorder for Windows (TR-5, 7xU)
*1: Software on CD-ROM is not supplied with the product. Free software download and
information on OS compatibility is available on the Software page of our website at tandd.
com/software/.