User's Manual

60
２.Enter upper and lower limit values.
●
Set the lower limit at more than –40,000 and set the upper limit at less
than 40,000.
３.By clicking the [OK] button, the setting will be completed.
※
If you have put a check on [Fixed], the lines in the graph may exceed the
boundaries of the graph.
【
Making all channel settings the same
】
Set CH.1 [Fixed] and by putting a check on [Make all Settings the same as
Ch. 1]; all channel settings will be the same as CH.1 regardless of other
channel settings.
●
Scale and Unit Conversion: From the [Tools] Menu
You can convert the scale and the unit of downloaded data for each channel.
１.
Select from [Designate by 2 points] or [Designate by y=ax+b].
２.Set conversion formulas and units.
３.By clicking the [OK] button, the setting will be completed.
【
Conversion Info
】
Current conversion formulas and units are displayed here.
Y indicates the data after conversion, and x indicates the voltage entering
from the sensor.
[OK]
button
[
Designate by y=ax+b
]
[
Designate by 2 points
]
Conversion Info