User's Manual

13
●
Remote Names
Remote Names can be entered with up to 8 letters. You can also select
an already registered remote name and make slight changes to create
a new name.
●
Communication Frequency Channel
By clicking the [Set] check box you can select a channel number.
One Frequency Channel (0-3) can be set for each Group.
●
The default frequency channel setting for Group 1 is ‘0’
●
If no settings are chosen, an unused frequency channel will be
automatically assigned.
NOTE:
●
A frequency channel setting can only be made when registering a
new group.
●
Once a channel has been set for a group it cannot be changed.
●
The specied frequency channel will be used for all communication
with remote units in that group. If another RTR-57C is using the same
channel in the same area, communication may become unstable.
４.By clicking the [Register] button, registration will be completed.
●
If you are registering a number of remote units to the same group, place
each one on top of the RTR-57C and carry out the registration into the
same group.
●
If you are registering units to different group names, please follow the
above steps over again.
《Remote Registration Display》