User's Manual

8
■
Connect the communication cable to your computer.
Connect the RS-232C communication cable (included in pack) to the
serial port of your computer.
■
Connect the Data Logger to your Computer.
If the data logger is an RTR-51/52/53, or RVR-52 unit, connect it to your
computer via an RTR-57C unit.
Serial Port Markings
The communication cable connection is a
D-Sub 9 pin female. Please connect it to a port
that has markings such as these.
メイン メニュー
WL
データスイアゲ
WL
コキ ケンサク
WL
オンド モニター
データ スイアゲ
データ ソウサ・リスト
キロク カイシ
Connect the communication cable from
your computer to the RTR-57C unit.
Place the data logger face
down on the RTR-57C.
Note:
●
If the cable is connected to the wrong port, communication cannot take place.
●
Be sure to securely connect the cable to avoid any communication failure
due to a loose connection.
Computer Communication Settings