User's Manual

IJı
ȺInitialization SettingsȻ
1.Network Initialization Settings Ȥfrom the Network Settings Utility
To connect to a network, it is necessary to enter an IP address and Subnet Mask that are
appropriate for your network. Under Network Initialization Settings make the appropriate
settings for your ȨIP addressȩ and ȨSubnet Maskȩ. More detailed settings can be made
in [Detailed Network Settings]
2.Remote Unit RegistrationȤ from RTR-5W for Windows
In order to carry out wireless communication between an RTR-5W base station and a Remote
Unit, please register Data Loggers as Remote Units as follows
1. Create a Location
2. Create Group(s)
3. Register Remote Unit(s)
Up to 64 Remote Units can be registered to one Location.
ȺBasic OperationsȻ
1. Recording SettingsȤ from RTR-5W for Windows
By setting the Recording Interval, the Recording Start Date / Time and the Recording Mode,
recording will begin at the set date and time.
2. Download Data Ȥfrom RTR-5W for Windows
Data recorded in the Remote Unit will be downloaded and saved in your computer as a data fi le.
Downloaded temperature and humidity data can be viewed in [Temp /Humidity Graph],
downloaded Voltage, Pulse and Temp / Humidity data can be viewed in [Multi-scale Graph] and
downloaded Event data can be viewed using [Event Viewer].