User's Manual

IJıIJ
10.
If it is displayed properly, make the initial network settings.
11.
After making the initial network settings, follow steps 1-4 above to open the [Internet
Protocol (TCP / IP) Properties] window. Re-enter the ȨIP addressȩ, ȨSubnet maskȩ,
ȨDefault Gatewayȩ, ȨPreferred DNS serverȩ, and ȨAlternate DNS serverȩ that
you had written down before and click the [OK] button.
12.
Open the browser, enter the address (URL) that you set in the settings utility and
check to make sure that the display is proper or not.
*If you are using a company network or are working in an environment that may have special settings and
after having followed the above procedures still cannot view the display properly, please connect your network
administrator.