User's Manual

ĸĵ
ȺMake all settings same as Ch. 1Ȼ
If you have chosen fi xed values for Ch.1 and put a check next to [Make all settings same
as Ch. 1], the settings will become the same for all other channels whether that channel
has been set to ȨFixedȩ or ȨAutoȩ.
ɡ Scale / Unit Conversion: From [Tools] Menu
It is possible to make settings for the conversion of units and scales for each channel of
downloaded data.
1.
Select to use 2 voltage points to convert the scale or to use the conversion equation of
y=Ax+B.
Conversion Info
[OK]
button
ȶDesignate by 2 pointsȷ
ȶy=Ax+Bȷ
2.
Make settings for the conversion equation and unit.
3.
Click the [OK] button to fi nish the setting process.
ȺConversion InfoȻ
The currently set conversion equation and the character array of the current unit will be
displayed.
By stands for the value after conversion and x is the voltage input directly from the sensor.