User's Manual

IJıı
4.
In the [Internet Protocol (TCP / IP) Properties] window, under [Use the following IP
address:] make sure that the IP address and Subnet Mask are correct .
Check to make sure
that the ȨIP addressȩ
and ȨSubnet maskȩ
are correct.
5.
In order to return the settings back to the original ones make sure to write down
the current settings for ȨIP Addressȩ, ȨSubnet Maskȩ, ȨDefault Gatewayȩ,
ȨPreferred DNS Serverȩ and ȨAlternate DNS Serverȩ.
6.
Enter "192.168.1.1 " as the IP Address and "255.255.255.0" as the Subnet Mask.
IP Address: 192.168.1.1 / Subnet Mask: 255.255.255.0
7.
After entering, click the [OK] button.
8.
Click the [OK] button as seen in the 8.3 Properties window to close the window.
9.
Once again, in the [Network Settings Utility] run a search and check whether the IP
address for the RTR-5W connected to the network is displayed.