User's Manual

ĹĹ
Auto-Download Settings
Make settings here to automatically download data from the selected Remote Units at the
specifi ed time.
1.
Open [RTR-5W for Windows].
2.
Select the Remote Unit(s) you wish to make settings for, and in the [Registration /
Administration] Menu click on [Remote Unit Properties].
*By right clicking on the selected Remote Unit icon(s), a popup menu will appear where you can select
[Remote Unit Properties] to display the same window.
3.
Select to download [Every day at a fi xed time] or [Fixed Interval] and make the
appropriate settings.
-Every day at fi xed time (24 hour clock)
Carry out the downloading of data automatically at a set time every day
-Fixed Interval
Carry out the downloading of recorded data automatically at a set interval of
time.(Make setting for 10 days or less)
4.
Click the [OK] button to fi nish the setting process.
Make settings
for the interval
between
downloads
Make settings
for the time of
download.
NOTE:
-
Make sure that RTR-5W for Windows is open when a programmed Auto-Download is
scheduled to occur.
-
If, another type of communication, such as a warning monitoring, occurs at the scheduled
downloading time and downloading is not possible, downloading will begin upon the ending of
the other communication.
-
Depending on radio wave conditions, data downloading may at times be impossible. Please
check in the downloading log for important data.
-
If the recording mode is set for One Time and the logger becomes full, you may be
downloading the same data over and over again