User's Manual

ijĸ
Network Initialization Settings
To connect an RTR-5W to a network, it is necessary to enter an IP Address and Subnet
Mask that are appropriate for your network.
NOTE:
Please note, that upon purchase, all RTR-5W units are set with the same IP address. To make IP address
changes, connect one unit at a time and carry out the changes.Do not connect more than one unit with the
same address to the network at the same time.
1.
Connect the RTR-5W to the same network as to which the computer you have opened
[Network Settings Utility] is connected to.
2.
Click on theȶNetwork InitializationȷTab and then click on the [Search] button. After
clickingȂthe search results will be shown in about 5 seconds.
*The factory default settings for RTR-5W are as follows: IP Addressȇ"192.168.1.200"ȂSubnet Maskȇ
"255.255.0.0". The MAC address is written on a sticker on the back of the RTR-5W unit .
[Change Settings]
button
[Search]
button
Connected
RTR-5W
3.
From the displayed list, select the RTR-5W to which you wish to make settings by
clicking on the IP address and click on the [Change Settings] button.
- Also, by double clicking on the IP address, theȶNetwork Settingsȷwindow appear.