User's Manual

ĵķ
ɡ Wireless Communication Test
Gather the current data readings from each Remote Unit and check to make sure that
wireless communication is possible between the Remote Units and the RTR-5W Station.
1.
Place a Remote Unit in the actual place from which you wish to measure and record
data.
- The wireless communication range, if unobstructed and direct, is about 100 meters [330 ft].
2.
Select the placed Remote Unit from the Administration Tree, and in the [Data] Menu,
select [Gather Current Data].
*By right clicking on the Remote Unit icon, a popup menu will appear where you can select [Gather
Current Data] to display the [Gathering Current Data] window.
Selected Remote
Unit is displayed
3.
Click the [Gather] button to start communication with the Remote Unit and the current
data readings will be displayed.
[Gather]
button
If the current readings are not displayed, move the Remote Unit to a different Location
and try gathering the current data again.