User's Manual

ĵij
ɡ Creating Groups
1.
In the [Registration / Administration] Menu, click on [Create Group] to display a window
where you can enter a name for the new Group.
*Up to 8 characters can be entered.
*In the Location name, you cannot use a space, or any of the following characters [\/:,;*?"<>|&]
[OK]
button
Enter a Group Name
2.
After entering the Group Name, by clicking the [OK] button, the Group will be created in
the Administration Tree.
Administration
Tree
Group Icon
3.
Click on the desired Group Icon. In the [Registration / Administration] Menu, select
[Group Properties] and assign a Communication Frequency Channel for the selected
Group.
*By right clicking on a Group icon, a popup menu will appear where you can select [Group Properties]
to display the same window.
-Once a Communication Frequency Channel setting has been made it cannot be changed.
-If a different Group is located nearby and there is a possibility that communication could occur at the
same time, please make sure to set the Communication Frequency Channels for each Group to a
different setting. If two Groups use the same Communication Frequency Channel at the same time
there is a great possibility that a communication failure will occur.
[OK]
button
Assign a Communication
Frequency Channel
4.
Click the [OK] button to fi nish the Group settings.