User's Manual

48
【If the upper and lower limit
settings are activated.】
NOTE:
●
The shorter the monitoring interval the sooner batteries will loose their
power.
●
<Communication Time for [All Groups] >
・If there are 64 Remote Units registered to the group
(24 seconds per group x Number of groups)
・If there are 250 Remote Units registered to the group
(54 seconds per group x Number of groups)
Moreover, the display time for each unit is about 2 seconds.
●
<Communication Time for [Specify Groups]>
The communication time will depend on the number of registered remote
units. For 250 units registered to 1 group the time will be 54 seconds plus a
display time for each unit of 2 seconds.
4.By selecting the monitoring range and clicking, the monitoring
search will begin.
● If using [Specify Group], by specifying the group and clicking, the
monitoring search will begin.
5.After the search has been completed, the current measurement
readings for those remotes registered in the group(s) will be
consecutively displayed.
● For RTR-53, the display will show in the order of temp / humidity.
● If the buzzer has been set to ON and a result is NG, a beeping sound will
go off.
Result
Upper and Lower Limits