User's Manual

●

If upper and lower limits have been set a ▼ will appear in the lower left

corner of the display. By turning the operation dial you can view the limit

settings and the judgment results.

【For RVR-52 Pulse Recording】

【If RVR-52 has been set for Event Recording Mode】

If no event data has been recorded,

[No Event Data] will appear.

Recording Signal Condition

●

The total number of pulse readings during the recording interval set when

recording settings were made for the Remote Unit will be displayed.

・

Rising Edge (OFF → ON) :

・

Falling Edge (ON → OFF)

# of Pulses / Recording Interval