User's Manual

Checking Upper and Lower Limits

By setting upper and lower limits you can check data as it is

downloaded to see if all measurements fall within the limit range

and have the results displayed.

◆ Setting the Upper and Lower Limit Range

NOTE:

Upper and lower limit settings that were set by computer when setting up the

recording start time for the Remote Unit will take precedence over other limit

settings.

1.In the Main Menu, open [SET FUNCTIONS]-[ Set ↑↓ Limits] .

Move the arrow to the item you wish to make settings for and open.

3.By clicking [Judgment OFF], it will change to [ON] .

4.By moving the arrow to the upper or lower limit and clicking, it will

allow you to make changes. By turning the operation dial, you can

make changes to the value; click to activate the new setting.

Upper Limit

Lower Limit

●

By holding down the

・

buttons on the main

unit you can make rapid changes to the values.

Pressing the button will make the value lower.

Pressing the button will make the value higher.