User's Manual

33
6.Once transmission has been completed, a message will appear
on the display telling you communication was completed
successfully. By pressing the operation dial you can go back to
the Recording Settings Menu Display.
The Remote Unit(s) will be put on Record Standby.
5.Connect the data logger to the RTR-57C and press the operation
dial to have the settings transmitted.
〔
For RTR-51/52/53
,
RVR-52 and TR-51A/52
〕
●
If light enters during communication,
an error will occur. Please make
sure to place the unit within the
ridges for an exact t.
Place logger face down on RTR-57C
〔
For TR-71S/72S
〕
Connect using the included
communication cable (TR-3C10)