User's Manual

32
3.Move the arrow to [Programmed] after setting the conditions.
4.Set the recording start time and move the arrow to [REC START].
1.In the Main Menu, open [REC SETTINGS]-[Direct].
2.Set the recording conditions.
【Programmed Start】
Recording Modes:
One Time: Recording will stop when the data capacity becomes full.
Endless: Recording will continue with oldest data continuously overwritten.
Recording Interval:
Choose from 15 intervals: 1,2,5,10,15,20,30 seconds and 1,2,5,10,15,20,30 and
60 minutes.