User's Manual
29
The following settings or changes can be made via the main unit.
●
Recording Start Time Setting (Programmed Start)
●
Recording Mode
●
Recording Interval
※ Please make temperature unit changes for the RTR-51/52/53 main units
and Measurement Mode changes for the RVR-52 units via the supplied
software『T&D Recorder for Windows 』
NOTE:
●
If you set the conditions during recording, all previously recorded data will
be lost. Make sure to make all Recording Start settings after having
download the recorded data.
●
If you make changes to the recording condition via the RTR-57C unit,
channel names may change. When you do not wish to change the names,
make sure to Read Settings before making changes.
※ RTR-51/52/53 and RVR-52 are not channel names, but are group or
remote unit names, so these names will not change.
1.In the Main Menu. open [REC SETTINGS] - [Direct].
2.Set the recording conditions.
【Immediate Start】
【What does [Read Settings] mean?】
The recording conditions of a specied Remote Unit can be read into an
RTR-57C unit.
If you wish to restart recording without making any changes to the recording
conditions, specify the Remote Unit and click [Read Settings]. The recording
conditions of the specied Remote Unit will be displayed.
Cable Communication:
Recording Start