User's Manual

●

If a selected Remote Unit has been set to only start recording via computer

and has been to set to be protected against changes in the recording start

via wireless communication, the following message will appear.

【How to Lift the Protection】

For details about how to lift the protection see the Help Menu in the provided

software『T&D Recorder for Windows 』or see its User’s Manual.

◆ About Reading the Recording Settings

Select a Remote Unit and press on [Read Settings] in the REC SETTINGS

Menu. After reading, the recording settings information for the selected

Remote Unit will be displayed.

NOTE: If you select a Group, this reading of settings cannot be done.

◆ About the Default Settings

At any time, you can return the RTR-57C to its default settings of Recording

Mode: Endless and Recording Interval: 10 minutes.

●

When starting recording by Group, a list will appear showing the Remote

Units with which communication occurred.

[PROT] will appear next to those Remote Units which have been set to only

start recording via computer and have been set to be protected against

changes in recording conditions via wireless communication.

◆ About Forbidding Recording Start by Wireless