User's Manual

20
●
Before selecting a Remote Unit you can run a search to nd all Remote
Units with which communication is possible. Those units with which
communication is possible will appear with a mark next to them.
(See p.45 for details)
●
Recording Modes:
One Time: Recording will stop when the data capacity becomes full.
Endless: Recording will continue with oldest data continuously
overwritten.
●
Recording Interval:
Choose from 15 intervals: 1,2,5,10,15,20,30 seconds and 1,2,5,10,15,20,
30 and 60 minutes.
3.Make Recording Condition Settings.
●
If you wish to make no changes and want to restart recording under the
same conditions, please read the current settings rst and then restart
recording. (See p.24 for details)
4.After having completed the settings, adjust the arrow (>) to [REC
Immediate] and press dial to transmit the recording conditions to the
Remote Unit.