User's Manual

19
The following settings and changes can be made from the main unit:
●
Recording Start Date and Time (Programmed Start)
●
Recording Mode
●
Recording Interval
※
To change the unit of temperature (
゜
C or
゜
F) in the RTR-51/52/53 units and the
measurement mode in the RVR-52 units, please use your computer and the
software『T&D Recorder for Windows 』.
1.In the Main Menu, click [REC SETTINGS] and then [ Wireless].
2.Select the Remote Unit for which you wish to make settings.
【Immediate Start】
NOTE:
●
If you make recording condition changes while recording, all previously
recorded data will be lost. Please make sure to download all recorded data
before making changes.
●
Changes in recording conditions will result in a lifting of the upper and lower
limits that had been set for each unit. If you wish for those settings to remain
in effect, please make sure to use the [Read Settings] function before
making any changes. (See p.24 for details.)
Wireless Communication:
Recording Start
Wireless Communication:
Recording Start
① Select a Group in which
Remote Units are registered.
② Select a Remote Unit or a
Group.