User's Manual

14
●
Read Logger Settings
The RTR-57C can read and display all settings for any selected data logger
that has been registered.
●
Search for Remote Unit (s)
A mark appears next to the name of any Remote Unit with which wireless
communication is possible.
●
Monitor Current Readings
You can monitor the current measurements of a Remote Unit at a set
interval or in groups with the measurements displayed consecutively.
◆
One Remote Unit can be set up to communicate with any
number of RTR-57C Units.
By registering the same Remote Unit info into a number of RTR-57C Units
it is possible to check and control settings, as well as download to any
RTR-57C Unit that carries that Remote Unit’s registration information.
NOTE:
If you try to carry out communication between one Remote Unit and several
RTR-57C Units at the same time, an error message will appear.
Group
You can transfer the registration contents from one RTR-57C to another via
the attached software. For details see the [Help Menu] in『T&D Recorder for
Windows』 or the User’s Manual that accompanies it.