User's Manual

89
Scale and Unit Conversion
You can convert the scale and the unit of downloaded data for each channel.
1. Select from [Designate by 2 points] tab or [Designate by y=ax+b] tab.
[OK]
button
[
Designate by 2 points
] tab
Conversion Info
[Designate by y=ax+b] tab
2. Set conversion formulas and units.
3. By clicking the [OK] button, the setting will be completed.
[Conversion Info]
Current conversion formulas and units are displayed here.
"y" indicates the data after conversion, and "x" indicates the voltage
entering from the sensor.