User's Manual

87
[OK]
button
Check
Vertical Axis Range Display Settings
You can set the upper and the lower limits of the graph's vertical axis scale for each
channel.
1. Check [Fixed] of the channel you wish to set.
2. Enter upper and lower limit values.
Set the lower limit at more than –40,000 and set the upper limit at less than
40,000.
3. By clicking the [OK] button, the setting will be completed.
Select [Fixed] and enter numerical
values.
Check here, If you wish to make
all of the settings the same.
[OK]
button
[Make all channel settings the same as Ch.1]
Set CH.1 [Fixed] and by putting a check on [Make all Settings the same as Ch.1]; all
channel settings will be the same as CH.1 regardless of other channel settings.
NOTE:
If you have put a check on [Fixed], the lines in the graph may exceed the boundaries of
the graph.