User's Manual

28
RTR-50 for Windows
Remote Unit / Relay Unit Registration
Basic Procedure for Registration
1. Connect an RTR-50 Unit with a USB or Serial communication cable to your
computer.
*The default setting for an RTR-50 unit is as a Base Unit.
฀
For details about connecting the RTR-50 with a USB communication cable to
your computer see p.12.
For details about connecting the RTR-50 with a Serial communication cable to
your computer see p.22.
2. Register Remote Unit Name and Group Name.
Register all Remote Units to be placed.
฀
฀

For details about registering units as Remote Unit(s) see p.31.
3. Register Relay Unit Names and Relay Routes.
฀
฀ ฀

฀
For details about Registering Relay Unit(s) see p.37.
NOTE:
There is no need to register a Relay Unit if there are no Relay Units between a
Remote Unit and the RTR-50 Base Unit. However, if communication cannot be
successfully carried out due to poor radio wave reception, please place Relay
Unit(s) between the Remote Unit and the Base Unit.