User's Manual
15
For Windows
®
Me
1.
Turn on your computer and open Windows. After Windows has been completely
started up, connect the supplied USB cable to a USB port on the RTR-50 and
your computer.
To RTR-50 To PC
RTR-50
2.
Insert the attached CD-ROM in the CR-ROM drive.If the Installation Window
opens, close it.
3.
By connecting an RTR-50 unit to the USB cable already connected to your
computer, the [Add New Hardware Wizard ] will automatically open.
4.
By clicking the [Next] button, a window will open where you can choose how you
wish to fi nd the driver fi le.
5.
Check [Automatic search for a better driver (Recommended )] and click the [Next]
button.
Check
[Next]button
If the Driver is not automatically detected
Please search by specifying the place as Ȩ[Device Driver\ RTR-50] in
the CD-ROM drive and install manually from there.