User's Manual
14
Getting Ready
For Windows
®
2000
1.
Turn on your computer and open Windows. After Windows has been completely
started up, connect the supplied USB cable to a USB port on the RTR-50 and
your computer.
To RTR-50 To PC
RTR-50
2.
Insert the attached CD-ROM in the CR-ROM drive.If the Installation Window
opens, close it.
3.
By connecting an RTR-50 unit to the USB cable already connected to your
computer, the [Found New Hardware Wizard ] will automatically open.
4.
By clicking the [Next] button, a window will open where you can choose how you
wish to fi nd the driver fi le.
[Next]button
5.
Check [Search for a suitable driver for my device (Recommended )] and click
the [Next] button.
6.
Check [CD-ROM drive] and then click the [Next] button.
7.
Click [Next] to start the installation.
8.
After completing installation, click the [Finish] button
Confi rm the Connections (see p.18).
If the Driver is not automatically detected
Please search by specifying the place as Ȩ[Device Driver\ RTR-50] in
the CD-ROM driveȩ and install manually from there.