User's Manual

13
Installing the USB Device Driver
You will need to install this driver in order to use the device with a USB cable and Windows.
The USB device driver must be installed for communication via USB between your
computer and an RTR-50.After installing the USB device driver, your computer will be able
to detect and recognize RTR-50 devices that have been connected with a USB cable.
For Windows
®
XP
1. Turn on your computer and open Windows. After Windows has been completely
started up, connect the supplied USB cable to a USB port on the RTR-50 and
your computer.
฀
฀฀ ฀฀
To RTR-50 To PC
RTR-50
2. Insert the attached CD-ROM in the CR-ROM drive.If the Installation Window
opens, close it.
3. By connecting an RTR-50 unit to the USB cable already connected to your
computer, the [Found New Hardware Wizard ] will automatically open.
4. By checking [Install the software automatically (Recommended)] and clicking
[Next], the software will automatically be installed.
[Next]button
5. After completing installation, click the [Finish] button
Confi rm the Connections (see p.18).
If the Driver is not automatically detected
Please search by specifying the place as Ȩ[Device Driver \ RTR-50] in
the CD-ROM driveȩ and install manually from there.