User's Manual

TR4 Series Specications
TR41A TR42A TR43A
Measurement Channels Temperature 1ch Temperature 1ch Temperature 1ch, Humidity 1ch
Sensor Thermistor (Internal) Thermistor Thermistor Polymer Resistance
Measurement Units °C, °F °C, °F °C, °F %RH
Measurement Range -40 to 80 °C -60 to 155 °C 0 to 55 °C 0 to 95 %RH
Accuracy Avg. ± 0.5 °C
Avg. ± 0.3 °C
at -20 to 80 °C
Avg. ± 0.5 °C
at -40 to -20 °C, 80 to 110 °C
Avg. ± 1.0 °C
at -60 to -40 °C, 110 to 155 °C
Avg. ± 0.3 °C
±5 %RH
at 25 °C, 50 %RH
Measurement Resolution 0.1 °C 0.1 °C 0.1 °C 1 %RH
Responsiveness
Thermal Time Constant:
Approx. 15 min.
Response Time (90%):
Approx. 35 min.
Thermal Time Constant:
Approx. 30 sec. (in air)
Approx. 4 sec. (in agitated water)
Response Time (90%):
Approx. 80 sec. (in air)
Approx. 7 sec. (in agitated water)
Response Time (90%): Approx. 11 min.
Logging Capacity 16,000 readings
8,000 data sets (One data set consists of read-
ings for multiple channels.)
Recording Interval Select from 15 choices: 1, 2, 5, 10, 15, 20, 30 sec. or 1, 2, 5, 10, 15, 20, 30, 60 min.
Recording Mode Endless (Overwrite oldest data when capacity is full) or One Time (Stop recording when capacity is full)
LCD Display Items
Measurements, Recording Status, Battery Life Warning, etc.
Communication Interfaces
Bluetooth 4.2 (Bluetooth low energy)
Power
Lithium Battery LS14250 x 1
Battery Life (*1) Approx. 1 year (*2) to 1.5 years (*3)
Dimensions H 62 mm x W 47 mm x D 19 mm (excluding protrusions and sensor)
Weight
Approx. 54 g Approx. 55 g
Operating Environment
-40 to 80 °C
-30 to 80 °C during wireless communication
Waterproof Capacity IP67: Immersion proof IP64: Splash proof (rated for use in daily life) (*4)
Accessories
- Temperature Sensor TR-5106 Temp-Humidity Sensor THB3001
Lithium Battery LS14250, Registration Code Label, Strap, User’s Manual (Warranty Included)
Data Collection Devices Smartphone, Tablet
*1: Battery life varies depending upon multiple factors including ambient temperature, recording interval, usage of applications, and battery
performance. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life.
*2: Estimated minimum battery life when recording data at an interval of 1 second and connecting to the mobile device once a day (for about 1
minute).
*3: Estimated maximum battery life when recording data at an interval of more than 10 seconds and connecting to the mobile device once a day
(for about 1 minute).
*4: This is the waterproof capacity of the data logger with the sensor connected. Note that the temperature-humidity sensor is not water
resistant.
The specications listed above are subject to change without notice.
Compliance Information
For FCC Model
Responsible Party:
CAS Dataloggers
Chesterland, Ohio
https://www.dataloggerinc.com/
FCC and ISED Statement
This device complies with part 15 of FCC Rules and Innovation,
Science and Economic Development Canada’s
licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme à la partie 15 des règles de la FCC
et aux normes des CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit
accepter tout brouillage subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
FCC Class B Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To comply with the limits for the Class B digital device, pursuant
to Part 15 of the FCC Rules, this device must be installed in
computer equipment certied to comply with the Class B limits.
All cables used to connect the computer and peripherals must be
shielded and grounded. Operation with non-certied computers
or non-shielded cables may result in interference to radio or
television reception.
FCC Caution:
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
ISED Class B Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-
003 du Canada.
FCC/ISED Radiation Exposure Statement
This equipment complies with FCC/ ISED radiation exposure
limits set forth for an uncontrolled environment and meets the
FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the
ISED radio frequency (RF) Exposure rules. This equipment should
be installed and operated keeping the radiator at least 20cm or
more away from person’s body.
Cet équipement est conforme aux limites d’exposition aux
rayonnements énoncées pour un environnement non contrôlé et
respecte les règles les radioélectriques (RF) de la FCC lignes directrices
d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-
102 de l’ ISDE Cet équipement doit être installé et utilisé en gardant
une distance de 20 cm ou plus entre le radiateur et le corps humain.
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
Location of FCC ID and ISED Certication Number
The FCC ID and ISED ID can be found inside the battery
compartment of your device.
For CE Model
CE Statement
The TR4 Series products are in compliance with the Radio Equip-
ment Directive 2014/53/EU.
The following standards have been applied:
<Safety and Health> EN 62368-1
EN 62311
<EMC> EN 301 489-1
<Radio Spectrum> EN 300 328 (receiver category 2)
The full text of the EU declaration of conformity is available at the
following internet address: https://tandd.com/manual/
Important Notice
Wireless products cannot be used in countries other than where
those products have been approved for use, according to that
country’s wireless regulations.
T&D Corporation shall in no manner whatsoever take
responsibility for the usage of these products, nor be liable in
any manner for legal consequences stemming from the usage of
these wireless products in unapproved areas.
사용자 안내문
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용 환경에서 사
용하는 경우 전파간섭의 우려가 있습니다 .
取得審驗證明之低功率射頻器材 , 非經核准 , 公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信 ; 經發現有干擾現象時 , 應立
即停用 , 並改善至無干擾時方得繼續使用。
前述合法通信 , 指依電信管理法規定作業之無線電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
電波法に関するご注意
本製品は、電波法に基づ特定小電力無線機技術基準適合証明(利用に関
)をています。必守ってお使いくさい
• 解・改 いでさい。分 解・改 れています。
• ラベルはさないでくさい。ラベのないもの使用は止されてい
ます。
Bluetooth® low energy の電波に関
本製品に Bluetoothlowenergy の使用周波数帯では、電子ンジ等の産業科学
医療用機のほか工場の製造ラン等で使されいる別用の構内無(免
無線局)び特定小電力無線局(免許い無線局並びアマア無線局
)が す。
1. 品を使用する前に、近く移動体識用の及び特定小力無
並びにアマチュア無局が用されていないことを確認し下さい。
2. 万一、本製品から移動体識別用の構内無線局に対て有害な電波干渉の事例が発
した場合には、速やかに使用周波数を変更するか又は電波の発射を停止した上、
下記先にご連絡頂き、混信回避のための処置等(例えば、パーテションの設
などについて相談し下さい
3. その他、製品から移動用の特定小電局あるいはマチュア無線
に対て有害な電波干渉の事例が発生した場合など何かお困のことが起き
、弊社までお問い下さい。
オンランサポtandd.co.jp/support/
と干
2.4
FH
3
使用周波数帯 :2.4GHz
変調方式:FH-SS
離:3 0 m
全帯域を使し、かつ移動別装置の帯域を回避
Bluetooth® のワドマークおよびロゴは、BluetoothSIG,Inc. が所有する録商標で
あり、株 ティアンドイはれらのマイセン使 用していす。
TheBluetooth®wordmarkandlogosareregisteredtrademarksownedby
BluetoothSIG,Inc.andanyuseofsuchmarksbyT&DCorporationisunder
license.