User's Manual

14
Procedure for Installing the RTR-574 /
Repeater USB Device Driver
Carry out all USB Device Driver installations for only
one Unit at a time.
Users of Windows XP should carry out the following procedure to install the
USB Device Driver.
1. By connecting a Remote Unit (RTR-574) or a Repeater to
your computer, the [New Hardware Detection Wizard] will
automatically open.
The “Wizard” window will only appear upon the first connection.
Check "No, not this time".
Click the [Next] Button.
Check "Install the software
automatically (Recom-
mended)".
Click the [Next] Button.
2. The installation process will begin.