User's Manual

1
Before Using...
Important Notes about the Installation Procedure (for using this
product with USB communication)
Thank you for choosing T&D Products
In order to use a USB connection to communicate between this product
and a PC, it is necessary to install the application and the USB driver.
Before connecting this product to a PC with a USB cable, it is
necessary to first install the application and th
e USB driver.
If you use the USB cable to connect the product to a PC before
installation, the USB driver may not properly install.
If you have connected the product to a PC without first installing the
driver, please make sure to press [Cancel] in the [Installation Wizard]
window when it pops up the PC screen and then disconnect the USB
cable from the product.
For more details about the proper ins
tallation procedure, see the
Software Introductory manual that accompanies [RTR-500DC for
Windows ].
Windows Vista
[Cancel]
Button
For other Windows Operating Systems
* The screen shot below is from Windows XP. For other Windows OS, there is also a [Cancel]
button in the lower right of the screen. (Your screen may differ slightly if you are using a
Windows OS other than XP.)
[Cancel]
Button