User's Manual

Cautions about using the Wireless Dongle(RTR-300)
The following items should be strictly obeyed for the safe usage of this product, and for protecting yourself
and other people from bodily harm and/or damage to property. Before using this product, please carefully
read, understand, and follow the safety rules and precautions outlined below.
Explanation of Warning Symbols
Danger
These entries denote the safety rules and
precautions which, if failed to be followed, can cause
serious physical damage or death.
Caution
These entries denote the safety rules and
precautions which, if failed to be followed, can cause
physical injury or damage to persons or things.
Explanation of Picture Symbols
Denotes an important warning or
actions.
Denotes a forbidden action.
Denotes an action that must be
taken.
Danger
Do not use an AC adaptor other than the one that is specified by T&D Corporation.
Do not short out, take apart, modify, deform, solder, or try to repair this product.
Do not store, leave, or use the product in any place subject to high temperatures such as direct
sunlight or near heating equipment, or to extremely low temperatures.
Make sure not to get it wet. If it does get wet, immediately stop using. Do not use or store in humid
places such as a bathroom.
Do not use in or near fire, nor directly put into cooking equipment such as a microwave oven or a high
pressure cooker.
Caution
This is a precision piece of equipment. Do not expose to strong impact or throw it.
Before inserting or removing the Product, please first touch metal around you (steel desk, door knob)
to clear static electricity.
Set and store out of the reach of infants.
If and when a child is to use the product, make sure they are given proper instructions on how to use
it.
Do not touch with wet hands.
If the product is not to be used for a long period of time, make sure to disconnect it from the AC
adaptor and PC.
Do not connect to a PC using a USB hub.
This product is not for saving data.
Notices about this Document and Disclaimers
- Due to continual improvements specifications, design and other contents outlined in the document are subject to
change without notice.
- Please follow the safety precautions outlined in this document carefully.
- T&D Corporation accepts no responsibility for any damages which occurred due to natural disasters and factors
which are not the responsibility of T&D, including fire, acts by the third party, other accidents, your willful or negligent
misuse, abuse, mishandling or other use under abnormal conditions.
- We cannot guarantee nor are we responsible for safety if this product is used in any manner other than was intended.
We accept no responsibility for any damage or loss of income caused by the use of our product.
- We are not responsible for any malfunction or trouble caused by the use of our product or by any problem caused by
the use of measurement results of our product. Please be fully aware of this before using our product.
- We accept no responsibility for any damages arising from the use of this product in combination with any and all types
of connective devices not related to T&D.