User's Manual

Installing the USB Device Driver

Have you already installed the software?

Before connecting an RTR-500 to your computer via USB,

make sure to install the software into the computer.

Connecting an RTR-500 to a Computer

Connect the RTR-500 with the supplied USB communication cable to the

computer.

- Make sure that the USB cable is inserted fully, so as not to cause an

improper connection.

- Please login using a User Account with Administrator (Computer

Administrator) rights.

For Windows XP (SP2 or higher)

1. By connecting the RTR-500 to the computer, the [Found New

Hardware] Wizard will automatically open.

- If that window does not automatically open, installation may have been

completed or failed. Please check whether the USB device driver has been

properly installed by following the directions on page 16.

2. Check "No, not this time" and then click the [Next] button.

Check the

"No, not this time".