User Manual

Other
44
FAQ's
Q&A about RTR-500GSM
Q1: The LED lamps do not come on, nor do they blink, what may be
wrong?
A:
If none of the three LED lamps come on nor do they blink, please check the
following:
Check to make sure that the operation switch is set to the “Run” position.
Check to make sure that the batteries are installed in the proper direction.
Please try installing new batteries.
If you are using an optional AC adaptor or have a cable connected to an
external power source, check that the connection to the RTR-500GSM is OK.
If after checking and trying the above, no change occurs to the LED, please
contact the dealer where the product was purchased.
Q2: If I use batteries as the power source, about how long can I
expect them to last?
A:
Expected battery life will vary depending on the environment where it is being
used and upon signal conditions. If warning monitoring is carried out every 10
minutes, you can expect new batteries to last about 10 days.
Q3: I want to use the unit outdoors, is the unit waterproof,
moistureproof and dustproof?
A:
The RTR-500GSM is not waterproof , moistureproof or dustproof. If you wish
to use outdoors or in areas where the unit may come into contact with
moisture, water or excessive dust, it will be necessary to place the unit in
some type of case with openings through which any cables can run.
Q4: Is it possible to change the batteries while the unit is in
operation?
A:
If the unit is connected to an AC adaptor or some other external power
source, it is possible to change the batteries.
If the unit is running only on battery power, first turn the operation switch to
“STBY” and then change the batteries.