User Manual

Other
40
Remote Units and Repeaters
The following outline shows the procedures for connecting a Remote
Unit / a Repeater to the computer.
Connecting a Remote Unit (Optical Communication)
1. Open the software application.
2. When the direction appears in the application window, connect
the Base Unit with a USB communication cable to the computer.
3. Place the Data Logger (Remote Unit) face down on the RTR-
500GSM (Base Unit), making sure that the optical communication
areas are aligned properly.
Optical communication
areas
Connecting a Repeater
1. Open the software application.
2. When the direction appears in the application window, connect
the Base Unit with a USB communication cable to the computer.
3. Connect the Repeater with a USB communication cable to the
computer.
USB Communication Cable