User Manual

Installing the Software and the USB Device Driver
27
Installing the USB Device Driver
Have you already installed the supplied software?
Before connecting an RTR-500GSM to your computer via USB,
make sure to install the supplied software into the computer.
Connecting an RTR-500GSM to a Computer
Connect the RTR-500GSM with the supplied USB communication cable to
the computer.
- Make sure that the USB cable is inserted fully, so as not to cause an
improper connection.
-
Please login using a User Account with Administrator (Computer
Administrator) rights.
For Windows
®
XP (SP2 or higher)
1. By connecting the RTR-500GSM to the computer, the [Found
New Hardware] Wizard will automatically open.
- If that window does not automatically open, installation may have been
completed or failed. Please check whether the USB device driver has been
properly installed by following the directions on page 28.
2. Check "No, not this time" and then click the [Next] button.
Check the
"No, not this time".