User Manual

Introduction
10
Basic Procedures
The following outline shows the basic procedures for getting ready,
making settings and using the product.
- Details about making settings can be found in [Help and Support] which is
located in the drop down menu found by clicking on the program's name
under [All Programs] in the [Start] Menu.
Getting Ready
1. Get the Base Unit (RTR-500GSM) ready to use
- Please purchase a SIM card separately.
2. Install the software "RTR-500GSM for Windows"
3. Install the USB device driver and confirm its usage.
4. Make Initial Settings for the RTR-500GSM
- From the RTR-500GSM Settings Utility in the supplied software
5. Get Remote Units ready to use
- For details, see the User’s Manual that accompanies the Remote Unit.
6. Get the Repeaters ready to use (only if necessary)
- For details, see the User’s Manual that accompanies the Repeater Unit.
Getting Ready (using supplied software)
1. Make Base Unit operational settings
2. Register Remote Units and Repeaters and make necessary
settings.
3. Make settings for the transmission of Current Readings,
Warning Reports, and for the Auto-downloading of Data
4. Carry out transmission tests