Computer Hardware User Manual

You can add a custom banner image to any auto attendant configured on the MCU as follows:

1. Go to .

2. Click the tab.

3. Click the name of a configured auto attendant.

4. Click the tab.

5. Refer to the table below to determine the most appropriate settings.

Chooses the default Codian MCU graphic to use

for your banner.

The custom banner identified for this auto

attendant. Click to remove this

graphic as the banner. Click after

uploading a new graphic.

Nothing displays here until you upload the

custom graphic as described below.

The custom graphic to be used for a banner. Click

to locate the file on your hard drive.

The image file can be a JPEG, GIF or Windows

BMP format with a maximum size of 1600 x

1200 pixels. If the file is smaller than this size, the

MCU will scale it to fit in the auto attendant's

banner area. Click to display.