Computer Hardware User Manual

130
Sets the audio and video combination to use, and
the overall media bit rate.
Choose whether to use the specified streaming
rate for multicast.
If this is set to Enabled then for any conference
with Streaming set to "Multicast" or "Unicast and
multicast", multicast audio and video streams will
be transmitted according to the corresponding
Streams setting.
Identifies the range of IP addresses to which
multicast streaming media should be sent.
Sets the range of port numbers to which the
media will be sent.
Identifies the protocol used by Windows Media
Player to stream data. Note that v11 only
supports HTTP; it no longer supports MMS over
UDP or MMS over TCP.