Computer Hardware User Manual

107
You can make some changes to your user profile. To do this, go to . Refer to the table below for
tips.
Your name, which identifies you to other users.
Changing this field does not change your log-in
User ID.
You can enter a new password.
Verify the new password.
Associates an E.164 telephone number with your
user account.
This limits the setup you will need to do each
time you join a video conference. When the
MCU receives a call from this number, it will be
recognized as coming from your phone. If the
device is an audio-only phone, you can set up an
associated video endpoint and/or upload a
picture file.
This field is not available for the system admin
account.
Associates a configured H.323 endpoint with your
user account.
If you call in to the MCU from your E.164 phone
number using an audio-only device, the MCU
calls your associated video endpoint and sends the
conference video stream to that associated video
endpoint (and receives a video-only stream from
that endpoint).
This field is not available for the system admin
account.
You can upload an image which will display in the
conference when you join conferences in audio-
mode only.
Click to locate the bitmap image. Then,
click to upload the image to the MCU.
The bitmap will only display if you call in to the
MCU from your E.164 phone number using an
audio-only device and you do not have an
associated video endpoint.