Specifications

73 StorageLoader Installation and User Manual
1209 Failed to fetch
at slot 09
Failed to eject
cartridge from
drive
1. Reboot the loader and retry the
operation.
2. Try to eject the cartridge from
the drive via the front panel menu.
3. Remove the drive FRU.
Connect power to drive and push
the drive’s eject button. If this
fails, remove cartridge by
following the drive’s emergency
eject procedure.
Defect drive or
robotics. Defect
cartridge.
2000 Drive not
found
Communication
error between
the loader and
the drive.
1. Reboot the loader and retry the
operation.
2. Remove back-panel cover plate
and check the SCSI cabling and
the ADI cabling.
SCSI and signal
cables, power
cables; defective
power supply;
defective drive.
2001 Drive
hardware fault
detected.
The drive has
reported a
hardware fault.
Reboot the loader and retry the
operation. If the problem persists
replace the drive.
Defective drive
Table 8.12. Error Codes. Suggested Actions.