Specifications

28 Chapter 4. Operation and Configuration.
Once the unit has completed the initialization processes, the Default screen as shown in Figure 4.3,
appears and the loader is ready for SCSI/SAS commands.
The Map of the cartridges has the following symbols:
1. A “?” when status is unknown and Inventory is still running.
2. A number indicates a slot occupied by a cartridge. To cartridge slot numbering is shown in
Figure 2.3.
3. Underscore line “_“indicates an empty slot.
4. “C” indicates that a Cleaning Cartridge occupies the slot.
The line below the map on the default screen gives the drive status. The drive status displayed is
drive-dependent.
Idle Menu
Map: __3_5_7_
Drive Empty
Figure 4.3. The Default screen.
The possible robot operation statuses are shown in Table 4.1 below.
# Operation Status Description
1 Idle The loader is idle
2 Fetching The loader is moving a cartridge from a magazine slot or
from the drive to the robot.
3 Stowing The loader is moving a cartridge from the robot to a
magazine slot or to the drive.
4 Moving The loader is moving the robot.
Table 4.1. Robot Operation Statuses.
Robot operation
status
Menu button
Soft Label
Line 2