User manual

Tandberg Data Maintenance
StorageLoader Installation and User Manual 67
Figure 6. 15 Removing the fan
Rem ove the fan fixing screws ( Figure 6. 15 ). Unhook the power
connector of the fan and carefully replace it. When re-inserting the
fan take care to have the cable in the notch in the chassis. If the
cable is not fully inside the notch it can easily be damaged and
cause a new faulty fan. Fasten the fan fixing screws.
Figure 6. 16 Notch in chassis for fan cable
After replacing a fan, pack the defective fan in the same box you
received the replacement fan, and return it to your support center.
Fan power cable Cable notch in chassis