User manual

Tandberg Data Maintenance
66 StorageLoader Installation and User Manual
supply and carefully unhook the connectors for power and fan
( Figure 6. 13 ) before com pletely rem oving the power- supply
module.
Figure 6. 13 Fan power
After removing the power-supply, insert the replacement unit
carefully the same way, reconnect the 2 cables, fasten the fixing
screw and re-mount the back plate. Then pack the defective power
supply in the same box you received the replacement power supply
and return it to your support center.
6.5.4 FRU Fan
This FRU consists of the following parts:
S808740 Fan FRU StorageLoader 1U
Item Descript ion Qty
1 Fan 1
2 Quick Installation Guide Fan 1
Figure 6. 14 Removing the back panel cover plate
Power connector Fan power c able
To remove the fan, switch off the loader and remove the
power cord. Remove these two screws and remove the
back - panel cover plate
Remove the four fan fixing
screws