User manual

Tandberg Data Maintenance
StorageLoader Installation and User Manual 63
Snap the front bezel that was removed from the replacement -
drive onto the front of the defective drive. Then pack the
defective drive in the same box you received the replacement -
drive and return it to your support center.
6.5.2 FRU Drive Tray Assy 220LTO and 420LTO
The 2 20LTO drive FRU consists of the following parts:
007171 StorageLoader FRU Drive Tray Assy 2 20LTO
Item Description Qty
1 220 LTO Bare Drive SCSI 1
2 Quick Installation guide FRU Drive Tray Assy
2 20LTO
1
The 420LTO drive FRU consists of the following parts:
006979 StorageLoader FRU Drive Tray Assy 420LTO
Item Description Qty
1 420LTO Bare Drive SCSI 1
2 Quick Installation guide FRU Drive Tray Assy
420LTO
1
Figure 6.8 Replacing the tape drive
For replacing the tape - drive, switch off the
loader, disconnect the power cord and remove
these two screws and the back - panel cover
plate.